The Ace 5856, from the new 5000 series. We stock 2 models, the 5856 & 5859
I include them all in the description as they are similar, the differences are:-
They all have an optional wired remote control available enabling the lap timer function
Please note, all 5XXX units are now supplied with BLACK fascia, not Silver!!
The Ace 5856 is towards the top of the range of Acewell dashes, combining sleek looks with a host of features :-
- Simultaneously displays, speedometer, fuel gauge, temp gauge & rev counter bar-graphics, gear indicator 1 - 8, N, P & R, there is a secondary digital display below the speed display which can be used to show clock, revs, temp etc.
- Backlight can be switched with sidelights as per IVA requirements
- Warning lamps, 2 x indicators, main beam, low fuel, oil, Shift light, Over temp, battery (adjustable voltage settings), & engine management light
- Digital tacho 10 -19,990 Rpm, Bar Graphic tacho can be switched 500 - 10,000 or 1,000 - 20,000
- Compatible with both car and motorcycle engined vehicles from 1 to multi cylinders (12+)
- Speed input can connect to magnet/reed switch sensor (included) or optional cable drive adaptor or directly to many speed sensors fitted to automotive & motorcycle gearboxes gearboxes.
- Speedo displays up to 248.5 Mph, switchable to 399.9 Kmh, will also display Max speed or average speed & mileage trips.
- Gear indicator calculates gear by comparing speed and RPM on manual gearbox cars, so no additional sensors are required, can display up to 8 gears & N for Neutral,P for park, R for reverse
- 100% water resistant so can be fitted to motorcycles, kitcars, off road buggies, beach buggies etc. without worrying about rain damage
- Includes RPM sensing wire, speed sensor, temperature sensor, and wiring harness
- Voltmeter displays 8.0 - 18.0 Volt
Maintenance reminder, user adjustable, hours or mileage
- Digital temp from 25deg C to 180 deg C, 77 - 356 deg F
- Bar temperature graphic display
Comes with a wired remote control, which allows the user to control the unit from the wired remote rather than the buittons on the front of the unit, it also has a 50 lap, lap timer which is also tripped manually from the remote switch - trackside infra red & magnetic transducer pickups are also available
- Fully IVA/MSVA compatible with no sharp edges, further warning lights may be required
- E-Marked for road vehicle use within Europe
- Dimensions 130mm wide at base, 105mm wide at top, x 80mm high, 25mm deep
Each kit Includes:
- 1 x Digital Dash
- 1 x Speed sensor and magnet
- 1 x Temperature sensor 1/8 NPT which can be used for water or oil temp.
- Fuel Gauge adjusts for 100, 250 & 500ohm sender units, reversible for senders operating in the opposite direction
- Voltage warning lamp can be configured for the voltages to come on and off to suit any vehicle
- Wired Remote control switch
- 1 x Set of cables, full wiring diagram & installation instructions.