Miniature projector headlight - Tiny but powerful! These projector lights measure just 40mm across the lens. You won't find this much power in such a small package elsewhere.H1 35W HID conversion now available!
These chassis projector units are similar to those used in our alloy bodied projector headlights, so if you don't need the alloy body, save yourself some money & mount one or more of these in an existing headlight unit, fairing, kitcar bodywork or your own custom made housing.
The dip (low) beam unit throws a standard flat beam pattern, fine for all legal requirements in UK, Europe & farther afield, they are E marked, dip beam is E9 & main beam is E4, so you can tell them apart once out of the box!
We can now offer a quality H1 35W HID conversion for these lights which perfectly retains the beam pattern but with the greater light output, brightness, white light & intensity of HID, plus lower power consumption, check other parts listed under projector lights
We also have a soft plastic boot to cover the rear of the light if required to make it more weatherproof & more aesthetically pleasing if the rear of the light is visible. The correct boot to fit this light is the 52mm one, the boots require cable ties to secure them in place, you'll find the boot both in our parts & accessory listings & here in the projector light section
Although small these lights throw the same beam pattern & light as our larger projector units.
Dimensions are:- 40mm dia lens, 54mm dia the black section around the lens, 110mm long from front of domed lens to rear of electrical connections & 72mm from the central split to the rear of electrical connections