HUD speedometer & Canbus Interface Secondary Speedo Simple to fit NOT GPS

This is for a combined purchase of our speedview HUD (heads up display) + a Canbus interface.

Compatable with over 300 different model of car

I also sell both items individually, please view my other items

This is for a Speedview HUD (Heads Up Display) + a Canbus Interface (scroll down for Canbus details)

Speedview HUD (Heads Up Display) info

Speedview HUD (Heads up Display) digital speedometer (identical functions & features to the non-GPS Valeo unit, but significantly cheaper!)

Buy from the only authorised Speedview dealer in the UK for full Sales, service & parts backup

The speedometer that could save your life! Every time you take your eyes off the road even for a fraction of a second there is the potential for an accident - keep your eyes where they should be - on the road - not on the dash, but still view your speed to keep safe!

The Speedview speedometer takes the signal from your vehicles speed sender & displays your speed digitally at the base of your windscreen - it is NOT reliant on GPS technology (which will not work in tunnels, under overhanging trees etc.)

Ideal for use as a secondary speedometer for driving school purposes where the standard speedo isn't visible from the passenger seat

Simple to Fit!

The speedview needs just 3 connections to make it operational - a 12V feed, an earth connection & a connection to the vehicles speed sensor (VSS). This can be accessed in several ways & will differ depending on the vehicle concerned. It will fit most vehicles, some very new & older (pre '95) vehicles may need further parts to fit

The simplest is if the vehicle has speed sensitive volume on the radio in which case the VSS feed can be accessed behind the radio, usually just a few minutes work, alternatively the wire from the VSS may be accessed at the vehicles ECU, at the rear of the speedo unit itself or directly from the VSS usually mounted on the gearbox - any competent DIY'er should be able to fit the unit in around an hour to an hour & a half

Further information on the unit Here on our website

The brightness of the display adjusts automatically so it doesn't dazzle at night & it is perfectly visible even against bright sunlight - we supply a small display screen which sticks to the inside of the windscreen to improve contrast, the green display has been scientifically chosen as the colour most visible to the human eye. It can be adjusted to display in either MPH or KPH during the setup procedure & speed alerts can also be programmed in to warn if you're over the set speed

Technical specifications

(+) Automatic brightness adjustment

(+) Five programmable speed alerts

(+) Non volatile memory

(+) EU Type-Approved (e9 02 6051)

(+) Manufactured in ISO 9001 & ISO 14001 accredited facility

Canbus info

Our Canbus interface connects simply & quickly into the wiring at the rear of the OBDII socket & requires just 4 connections to work, +12V, Earth, Can High & Can Low, the fifth wire (orange) is the output which gives a vehicle speed pulse signal for connection to a suitable speedometer, navigation systems - taximeters - cruise Control - Fleet Management - Parking Sensors - Motability - Speed limit 

Output is as follows:-

Frequency Approx. 1Hz per mph

Output voltage 12V square wave

Minimum speed 1.7mph

Approx. pulse/mile 3600

Simply connect and go, no complicated programming required.

The CB-1 CAN Bus interface is a simple signal output device for obtaining a vehicle speed pulse signal (VSS) from virtually any vehicle using a CAN Bus system.

The CB-1 is now compatible with 40 vehicle manufactures covering 300+ different models, including Commercial vehicles using SAEJ1939, Vehicle manufacturer coverage:-

Alfa Romeo, Aston Martin, Audi, BMW, Chrysler, Citroen, Dodge, Ferrari, Fiat, Ford, GM/Cadillac, Honda, Hyundai, Iveco, Jaguar, Jeep, Kia, Lamborghini, Landrover, Lexus, Mazda, Mercades, Mini, Mitsubishi, Nissan, Peugeot, Porche, Renault, Rover, Saab, Seat, Skoda, Smart, Ssang Yong, Subaru, Suzuki, Toyota, Vauxhall, Volkswagen, Volvo

Features built-in diagnostic LEDs to indicate CAN Bus status.

Applications: Electronic speedometer, Navigation systems - Taximeters - Cruise Control - Fleet Management - Parking Sensors - Motability - Speed limiters

The CB1 interface works with the vast majority of modern vehicles, over 40 manufacturers (see below) & 350+ models – all common vehicles covered, but if in doubt just give us a ring to confirm 07905 879407

The unit is completely passive (makes no input to the Canbus or ECU systems) hence will not interfere with warranties or Main Dealer diagnostic equipment