Twin vertical stacked projector headlight - unique design & supplied complete with alloy mounting brackets. H1 35W HID conversion now available!
Twin vertically stacked projector headlamps come as a pair of dip (low) & main (high) beam units. These are bolted together into brackets with alloy fork mountings included, as standard they will fit forks from 35 - 50mm. They are pre-wired to a standard H4 headlamp plug ready to plug straight into most motorcycle looms with no modification. Look fantastic on a modern custom, streetfighter or trike.
They accept the standard H1 bulb & the dip beam throws a flat beam pattern suitable for use in the UK, Europe & most of the world. They are "E" marked E4 & E9
We can now offer a quality H1 35W HID conversion for these lights which perfectly retains the beam pattern but with the greater light output, brightness, white light & intensity of HID, plus lower power consumption, just £35.99each includes bulb, ballast & all wiring (you will need 2 of these for both lights. These are so new we've not got pictures yet just contact us firstname.lastname@example.org if you want one, or ring the usual no. 07905 879407
The lights have pressed steel bodies & steel & alloy mounting brackets & require minor assembly with a couple of Allen keys & a screwdriver (not supplied), takes about 5 minutes to assemble.
The fork brackets fit forks from 35 - 50mm, you could go smaller with packing rubbers or possibly a little larger with some doctoring of the fork mountings. The adjustment for fork spacing can be set between 155mm & 200mm centre to centre of the fork stanchions. The lights measure 155mm long individually, from centre of forks to front of lower light is 170mm
Dimensions:- Each lamp measures 60mm lens diameter, 70mm across the black section surrounding the lens & 90mm width across the bracket mountings
Twin Stack Projector Headlamps - Dip (Low) & Main (High) beam